12KV 100A Dropout Fuse

Model:DOF12100C320
The primary purpose of any 12KV 100A Dropout Fuse is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Model:DOF12100C320

Send Inquiry PDF DownLoad

Product Description

Principle and Function of 12KV 100A Dropout Fuse

The high-voltage drop-out fuse consists of three parts: insulating support, dynamic and static contacts, and fuse tube. The static contacts are installed at both ends of the insulating support, and the fuse tube is composed of an inner arc suppression tube and an outer phenolic paper tube or epoxy glass fiber cloth tube.

Drop-out fuses are suitable for power systems with a frequency of 50/60Hz and a rated voltage of 35KV and below, and are installed on the high-voltage side of distribution transformers or on the main lines of distribution. The main function is where the protection performance is not high, it can be used in conjunction with the isolating switch to replace the automatic air switch; it can also be used in conjunction with the load switch to replace the expensive circuit breaker. It also has short circuit protection, overload and isolation circuits.

Product Parameter (Specification)

Type	Unit	DOF12100C320
Rated Voltage	KV	12
Rated Current	A	100
Rated Short-circuit Breaking Current	KA	8
Impulse Withstand Voltage (BIL)	KV	110
Power Frequency withstand Voltage	KV	35
Creepage Distance	mm	320
Weight	kg	6.7
Applicable Standard		IEC 60282-2
Package Size	cm	4928.511.5