24kV 100A Polymer Dropout Fuse

Model:JDOS24100C600
The primary purpose of any 24kV 100A Polymer Dropout Fuseis to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Model:JDOS24100C600

Send Inquiry PDF DownLoad

Product Description

Principle and Function of 24kV 100A Polymer Dropout Fuse

The high-voltage drop-out fuse consists of three parts: insulating support, dynamic and static contacts, and fuse tube. The static contacts are installed at both ends of the insulating support, and the fuse tube is composed of an inner arc suppression tube and an outer phenolic paper tube or epoxy glass fiber cloth tube.

Drop-out fuses are suitable for power systems with a frequency of 50/60Hz and a rated voltage of 35KV and below, and are installed on the high-voltage side of distribution transformers or on the main lines of distribution. The main function is where the protection performance is not high, it can be used in conjunction with the isolating switch to replace the automatic air switch; it can also be used in conjunction with the load switch to replace the expensive circuit breaker. It also has short circuit protection, overload and isolation circuits.

Product Parameter (Specification)

Type	Unit	JDOS24100C600	JDOS24100C600
Rated Voltage	KV	24	24
Rated Current	A	100	200
Rated Short-circuit Breaking Current	KA	8	8
Impulse Withstand Voltage (BIL)	KV	125	125
Power Frequency withstand Voltage	KV	50	50
Creepage Distance	mm	600	600
Weight	kg	4.8	5.3
Applicable Standard		IEC 60282-2	IEC 60282-2
Package Size	cm	52.530.539=3pcs	52.530.539=3pcs