Home > Products > Arrester and Protection Device > Surge Arresters > 42KV 10kA Polymer Surge Arrester
42KV 10kA Polymer Surge Arrester
  • 42KV 10kA Polymer Surge Arrester42KV 10kA Polymer Surge Arrester

42KV 10kA Polymer Surge Arrester

Model:YH10W-42C1080
M.V. 42KV 10kA Polymer Surge Arrester Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions. Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.

Model:YH10W-42C1080

Send Inquiry    PDF DownLoad

Product Description


42KV 10kA Polymer Surge Arrester Normal service conditions


1.The ambient temperature: -40°C ~+40°C
2.The altitude above sea level :not exceed 1000-2000m (the altiplano area should be indicated when order)
3.Earthquake intensity: not higher than 7 degrees;
4.Maximum wind velocity :less than 35m/s.

5.The filthy area should be given clear indication.


Product Feature


The zinc oxide lightning arrester is the most advanced over-voltage protector in the world. Due to make the resistor disc of core component mainly adopt zinc oxide arrester. Compared with the conventional silicon carbide arrester, this   prescription of the product improves greatly the volt-ampere characteristics of the resistor disc and increase through- current capability at over-voltage so as to bring a rad local-changes for the characteristics of the arresters.


* Rated Voltage(Ur): 42kV
* Nominal Discharge Current(In): 10kA
*Max. Continuous Operating Voltage (Uc): 34KV
*Frequency: 50/60Hz
*Max. Residual Voltage Corresponding to
a) Steep Current Impulse: 134KV
b) Lightning Impulse Level at Nominal discharge current: 126kV
c) Switching Current Impulse Level: 97kV
* 4/10 μs High Current Impulse(Imax): 100kA
* Creepage distance: 1080mm



More Products









Hot Tags: 42KV 10kA Polymer Surge Arrester, China, Manufacturers, Suppliers, Factory, Cheap, Low Price, IEC, Newest, Quality, Latest Selling

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept