Leave Your Message
48KV 10kA Polymer Lightning Arrester

surge arresters

48KV 10kA Polymer Lightning Arrester

  • Model YH10W-48C1500

Transformers and other equipment in station and distribution systems are shielded from atmospheric (particularly lightning effects) and operational circumstances by M.V. Polymer Lightning Arresters.
oxides of metals Gapless lightning arresters are made to guard against potential harm during ordinary energy system surges, but they don't affect energy systems when operating at normal voltage. Due to the non-linear properties of metal-oxide varistors between the voltage and current scales, gapless arresters have this unique feature. When compared to silicon carbide lightning arresters, the non-linear feature is significantly higher.

Contact us

NORMAL SERVICE CONDITIONS

 1.The ambient temperature: -40°C ~+40°C
 2.The altitude above sea level :not exceed 1000-2000m (the altiplano area should be indicated when order)
 3.Earthquake intensity: not higher than 7 degrees;
 4.Maximum wind velocity :less than 35m/s.
 5.The filthy area should be given clear indication.

PRODUCT FEATURE

The zinc oxide lightning arrester is the most advanced over-voltage protector in the world. Due to make the resistor disc of core component mainly adopt zinc oxide arrester. Compared with the conventional silicon carbide arrester, this   prescription of the product improves greatly the volt-ampere characteristics of the resistor disc and increase through- current capability at over-voltage so as to bring a rad local-changes for the characteristics of the arresters.

* Rated Voltage(Ur): 48kV
* Nominal Discharge Current(In): 10kA
*Max. Continuous Operating Voltage (Uc): 38.5KV
*Frequency: 50/60Hz
*Max. Residual Voltage Corresponding to 
a) Steep Current Impulse: 148KV
b) Lightning Impulse Level at Nominal discharge current: 139kV
c) Switching Current Impulse Level: 112kV
* 4/10 μs High Current Impulse(Imax): 100kA
* Creepage distance: 1500mm
1cje

contact us