IEC/IEEE and DVE-recommendation standards especially comply with DIN VDE 0670 part
All steels are made of either in stainless steel or hot-dip galvanized steel.
1. Solid and stable base frame.
10. High reliabilty up to 1000 cycles (depending on the running current).
11. All contacts are either sliver or tin-plated.
Ambient Temperature: -30℃ - +40℃
Frequency: 50Hz / 60Hz
Maximum Wind Speed: 35m/s
|Impulse Voltage (BIL)||KV||150||150|
|Power Frequency withstand Voltage||KV||50||50|
An electrical device for the reliable disconnection of certain sections of a high-voltage electrical network when there is no current in them. The use of isolating switches (either alone or in combination with high-speed short-circuiting devices) makes it possible to simplify the arrangement of switching points and transformer substations and to eliminate expensive high-voltage circuit breakers.
In the case of damage to certain sections of a network, the circuit breakers operate first, and then the isolating switches automatically disconnect the damaged section, after which the circuit breakers close again and restore electric power to the rest of the consumers on the network. Isolating switches are also used to disconnect and reconnect unloaded transformers and sections of power lines during operation. An isolate switch must provide a reliable connection in case of a random occurrence of a short circuit in the network. An important characteristic of an isolating switch is a short operate time, particularly the disconnect time, which must not exceed 0.1 sec.