jecsany@163.com      +86-13065600656    
You are here: Home » News » News » How to Install the Automatic Splice Joint?
DETAIL

How to Install the Automatic Splice Joint?

The Automatic Splice Joint quickly used to connect the conductor (ground) wire and maintain the electrical and mechanical properties of the conductor (ground) wire.

Installation steps of Automatic Splice Joint as below,

1. Use a wire brush to remove the oxide layer on the wire surface;

Installation steps of Automatic Splice Joint as below,

1. Measure the length from the knurled joint to the guide cap on the wire, and mark it;

Installation steps of Automatic Splice Joint

2. Smoothly insert the wire into the middle fixing block, and pull it outward to check whether the wire is clamped.

Installation steps of Automatic Splice Joint2


Installation steps of Automatic Splice Joint as below5


Product Inquiry

PRODUCTS

CONTACT US

ADD:      1906, Haiyun Building, No.70, Tianjian Lane, 
                Shounan Street, Yinzhou District, Ningbo,
                Zhejiang,  China (Mainland) 
PHONE:  +86-13065600656
E-MAIL:   jecsany@163.com   
                Jason@jecsany.com 
© 2019 Ningbo Jecsany Electrical Equipment Co., Ltd. All Rights Reserved.