China Cable Terminals and Accessories Factory
The copper terminal (Cable Lug) is used for crimping the terminal of copper cable, and the whole material is copper.
Copper-aluminum terminals (Bimetal terminals Lug) are used for crimping terminals for copper-aluminum cables. The material of barrel part is aluminum and the material of the stud hole part is copper.
The parallel groove clamp (PG Clamp) is used for the connection of small and medium section aluminum stranded wire or steel core aluminum stranded wire and the steel stranded wire of the overhead lightning arrester at the position that does not bear the tension, and also used for the jumper connection of non-linear towers. Power engineering materials (fittings) are mainly used for connecting wires to connect to each other in power line engineering.
Parallel groove clamps are all non-load-bearing types, mainly including bolt type parallel groove clamp, H type (or C type) parallel groove clamp and wedge type parallel groove clamp, among which bolt type parallel groove clamp is also There are two types of equal-diameter parallel groove clamps and different diameter parallel groove clamps.
The Joint Automatic Splice are used to connect wires or lightning conductors, and are mainly splicing pipes and repair pipes, parallel groove clamps, pre-twisted wires, etc., which are used in various crimping methods of wires (clamping, hydraulic, explosion pressure, etc.).
The connection methods of wires mainly include clamping and crimping. When the cross-section of the wire is less than or equal to 240mm2, the clamping connection is used. When the cross-section of the wire is greater than or equal to 300 mm2, the crimping connection is used. For example, it is connected by hydraulic pressure or explosion pressure method, and the lightning protection wire is connected by crimping method.
"JECSANY" Cable Terminals and Accessories have stable quality and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
- View as
APG-C1 Adjustable Bolt Type Aluminum Cable Parallel Groove PG Clamp
Model:APG-C1
Jecsany as a professional high quality APG-C1 Adjustable Bolt Type Aluminum Cable Parallel Groove PG Clamp manufacturer, you can rest assured to buy APG-C1 Adjustable Bolt Type Aluminum Cable Parallel Groove PG Clamp from our factory and we will offer you the best after-sale service and timely delivery.Parallel Groove CLAMP is used for connecting or branching AAC,AAAC or ACSR overhead conductors. Forging creates a high strength clamp.Slotted holes allow adjustment for varying conductors on each side.Its type test is in accordance with IEC6238-1.
APG-B4 High Mechanical Pullout Strength Adjustable Connector Aluminum PG Clamp
Model:APG-B4
Jecsany as the professional manufacturer, we would like to provide you high quality APG-B4 High Mechanical Pullout Strength Adjustable Connector Aluminum PG Clamp.Parallel Groove CLAMP is used for connecting or branching AAC,AAAC or ACSR overhead conductors. Forging creates a high strength clamp.Slotted holes allow adjustment for varying conductors on each side.Its type test is in accordance with IEC6238-1.
APG-B3 Corrosion Resistant Double Bolts Parallel Groove Electrical Wire PG Clamp
Model:APG-B3
You are welcomed to come to Jecsany factory to buy the latest selling, low price, and high-quality APG-B3 Corrosion Resistant Double Bolts Parallel Groove Electrical Wire PG Clamp.Parallel Groove CLAMP is used for connecting or branching AAC,AAAC or ACSR overhead conductors. Forging creates a high strength clamp.Slotted holes allow adjustment for varying conductors on each side.Its type test is in accordance with IEC6238-1.
APG-B2 Aluminum Customized Connector PG Clamp For Cable Conductor
Model:APG-B2
You can rest assured to buy customized APG-B2 Aluminum Customized Connector PG Clamp For Cable Conductor from Jecsany. Parallel Groove CLAMP is used for connecting or branching AAC,AAAC or ACSR overhead conductors. Forging creates a high strength clamp.Slotted holes allow adjustment for varying conductors on each side.Its type test is in accordance with IEC6238-1.
APG-A2 Overhead Line Fittings High Voltage Parallel Groove Cable Connector Aluminium PG Clamp
Model:APG-A2
With years of experience in production APG-A2 Overhead Line Fittings High Voltage Parallel Groove Cable Connector Aluminium PG Clamp, Jecsany can supply a wide range of APG-A2 Overhead Line Fittings High Voltage Parallel Groove Cable Connector Aluminium PG Clamp. Parallel Groove CLAMP is used for connecting or branching AAC,AAAC or ACSR overhead conductors. Forging creates a high strength clamp.Slotted holes allow adjustment for varying conductors on each side.Its type test is in accordance with IEC6238-1.
APG-A1 Adjustable Bolt Type Aluminum Parallel Groove PG Clamp
Model:APG-A1
Jecsany is a professional leader China APG-A1 Adjustable Bolt Type Aluminum Parallel Groove PG Clamp manufacturer with high quality and reasonable price.Parallel Groove CLAMP is used for connecting or branching AAC,AAAC or ACSR overhead conductors. Forging creates a high strength clamp.Slotted holes allow adjustment for varying conductors on each side.Its type test is in accordance with IEC6238-1.
DTL-2 Type 630 mm2 Aluminum Copper Electrical Flat Round Terminal Lugs
Model:DTL-2-630-17
High quality DTL-2 Type 630 mm2 Aluminum Copper Electrical Flat Round Terminal Lugs is offered by China manufacturer Jecsany. Cable terminal lug is a kind of accessory for electrical connections, which can be crimped on cable/wire/ electrical equipment without thermal treatment. Our company supplies a wide range of premium quality lugs to satisfy different demands. Our products are designed, manufactured and tested as per CE and GB standards to ensure good performance.
DTL-2 Type 500 Mm2 Copper Aluminum Flat Solder Round Terminal Cable Lug
Model:DTL-2-500-17
Jecsany is a leading China DTL-2 Type 500 Mm2 Copper Aluminum Flat Solder Round Terminal Cable Lug manufacturer, supplier and exporter.Cable terminal lug is a kind of accessory for electrical connections, which can be crimped on cable/wire/ electrical equipment without thermal treatment. Our company supplies a wide range of premium quality lugs to satisfy different demands. Our products are designed, manufactured and tested as per CE and GB standards to ensure good performance.
DTL-2 Type 400mm2 Round Copper Stamping Cable Terminal Lugs For Power Cable
Model:DTL-2-400-17
Jecsany is China manufacturer & supplier who mainly produces DTL-2 Type 400mm2 Round Copper Stamping Cable Terminal Lugs For Power Cable with many years of experience. Hope to build business relationship with you.Cable terminal lug is a kind of accessory for electrical connections, which can be crimped on cable/wire/ electrical equipment without thermal treatment. Our company supplies a wide range of premium quality lugs to satisfy different demands. Our products are designed, manufactured and tested as per CE and GB standards to ensure good performance.
DTL-2 Type 300 Mm2 Copper Aluminum Electrical Bootless Flat Terminal Cable Lug
Model:DTL-2-300-13
Jecsany is a professional China DTL-2 Type 300 Mm2 Copper Aluminum Electrical Bootless Flat Terminal Cable Lug manufacturer and supplier. DTL-2 series of copper-aluminum wiring terminal is suitable for transition of the circular aluminum wires, hemicycle-sector aluminum wire, power supply cable in the distribution equipment and copper terminals of the electrical equipment. The products adopt friction welding workmanship, It has advantage of good electric conductance, electrochemical corrosion resistance, long service life.
DTL-2 Type 240 mm2 Aluminum Copper Electrical Cable Lugs Types Terminals
Model:DTL-2-240-13
Find a huge selection of DTL-2 Type 240 mm2 Aluminum Copper Electrical Cable Lugs Types Terminals from China at Jecsany.DTL-2 series of copper-aluminum wiring terminal is suitable for transition of the circular aluminum wires, hemicycle-sector aluminum wire, power supply cable in the distribution equipment and copper terminals of the electrical equipment. The products adopt friction welding workmanship, It has advantage of good electric conductance, electrochemical corrosion resistance, long service life.
DTL-2 Type 185 mm2 Bootlace Copper Tube Stamping Terminal Cable Lugs
Model:DTL-2-185-13
Jecsany is DTL-2 Type 185 mm2 Bootlace Copper Tube Stamping Terminal Cable Lugs manufacturers and suppliers in China who can wholesale DTL-2 Type 185 mm2 Bootlace Copper Tube Stamping Terminal Cable Lugs.Cable terminal lug is a kind of accessory for electrical connections, which can be crimped on cable/wire/ electrical equipment without thermal treatment. Our company supplies a wide range of premium quality lugs to satisfy different demands. Our products are designed, manufactured and tested as per CE and GB standards to ensure good performance.
