Home > Products > Fuse Cutouts

China Fuse Cutouts Factory

"JECSANY" is a professional China various medium and high voltage product provider which supplies Fuse Cutouts, surge Arrester and Protection Device, vacuum circuit breakers, auto reclosers, switchgear, polymer/porcelain insulators, power tools, power accessories, OPGW/ADSS, distribution transformers, etc. And be able to provide one-stop service for new and old customers, including product development, design, manufacturing, transportation, installation, and after-sales service.

Fuse Cutouts are the most commonly used short-circuit protection switch for branch lines and distribution transformers of 10kV-36KV distribution lines.
The drop-out fuse is installed on the branch line of 10kV-36KV distribution line, which can reduce the scope of power outage. Because it has an obvious disconnection point, it has the function of isolating switch, which creates a safe working environment for the lines and equipment in the maintenance section.
Installed on the distribution transformer, it can be used as the main protection of the distribution transformer.
It has the characteristics of economy, easy operation and strong adaptability to outdoor environment. It is widely used in 10kV-36KV distribution lines and the primary side of distribution transformers as protection and equipment switching and switching operations, and has been popularized.
The working principle of the drop-out fuse can be summarized as follows:
The moving contacts at both ends of the fuse tube are fastened by the fuse (melt), and after the upper moving contact is pushed into the "duckbill" protruding part, the upper static contact made of phosphor copper sheet is pressed against the upper moving contact. head, so the fuse tube is firmly stuck in the "duckbill". When the short-circuit current is blown through the fuse, an arc is generated, and the steel paper tube lined with the fuse tube generates a large amount of gas under the action of the arc. Because the upper end of the fuse tube is sealed, the gas is ejected to the lower end to blow out the arc. Because the fuse is blown, the upper and lower moving contacts of the fuse tube lose the tightening force of the fuse. Under the action of the fuse tube's own gravity and the spring sheets of the upper and lower static contacts, the fuse tube falls rapidly and the circuit is disconnected , remove the faulty section line or faulty equipment.

"JECSANY" Fuse Cutouts have stable quality and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
View as  
 
Overhead Service Low Voltage 400A Pole Wall Mounted Cutout

Overhead Service Low Voltage 400A Pole Wall Mounted Cutout

Model:JF400-5
Overhead Service Low Voltage 400A Pole Wall Mounted Cutoutdesigned with ease of use and simplicity in mind, this pole mountable used cutout is the ideal method of providing rural dwellings with a safe, protected and reliable low voltage power supply.

Read MoreSend Inquiry
33KV Load Break Outdoor Fuse Cutout with Arc Chute

33KV Load Break Outdoor Fuse Cutout with Arc Chute

Model:LBFCO33660
The 33KV Load Break Outdoor Fuse Cutout with Arc Chute is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
24KV Expulsion Outdoor Fuse Cutout with Arc Chute

24KV Expulsion Outdoor Fuse Cutout with Arc Chute

Model:LBFCO24100C320
The primary purpose of any 24KV Expulsion Outdoor Fuse Cutout with Arc Chute is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
15KV Expulsion Outdoor Fuse Cutout with Arc Chute

15KV Expulsion Outdoor Fuse Cutout with Arc Chute

Model:LBF15100C230
The primary purpose of any 15KV Expulsion Outdoor Fuse Cutout with Arc Chute is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
High Voltage 24kv Dropout Fuse Cut Out

High Voltage 24kv Dropout Fuse Cut Out

Model:JDOP27100C440
The primary purpose of any High Voltage 24kv Dropout Fuse Cut Out is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
15KV Creepage 275mm Dropout Fuse Cut Out

15KV Creepage 275mm Dropout Fuse Cut Out

Model:JDOP15100C275
The primary purpose of any 15KV Creepage 275mm Dropout Fuse Cut Out is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
15KV Creepage 320mm Expulsion Dropout Fuse

15KV Creepage 320mm Expulsion Dropout Fuse

Model:JDOP12100C320
The primary purpose of any 15KV Creepage 320mm Expulsion Dropout Fuse is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
36KV Porcelain Leakage distance 720mm Dropout Fuse

36KV Porcelain Leakage distance 720mm Dropout Fuse

Model:JDOP361C720
The primary purpose of any 36KV Porcelain Leakage distance 720mm Dropout Fuse is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
33KV Porcelain Expulsion Dropout Fuse

33KV Porcelain Expulsion Dropout Fuse

Model:JDOP331C660
The primary purpose of any 33KV Porcelain Expulsion Dropout Fuse is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
15KV Expulsion Outdoor Fuse Cut Out

15KV Expulsion Outdoor Fuse Cut Out

Model:JDOP151C230
The primary purpose of any 15KV Expulsion Outdoor Fuse Cut Out is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
36KV Porcelain Leakage distance 900mm Dropout Fuse

36KV Porcelain Leakage distance 900mm Dropout Fuse

Model:FCOP36100C900
The primary purpose of any 36KV Porcelain Leakage distance 900mm Dropout Fuse is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
Expulsion Dropout 33kv T Bar Type Fuse Cut Out

Expulsion Dropout 33kv T Bar Type Fuse Cut Out

Model:DOPT33660
The primary purpose of any Expulsion Dropout 33kv T Bar Type Fuse Cut Out is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. T Bar Type Fuse cutouts provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

Read MoreSend Inquiry
Jecsany is one of the professional Fuse Cutouts manufacturers and suppliers in China. Welcome to buy newest cheap Fuse Cutouts from our factory. our products are high quality and latest selling, IEC, we are happy to provide you with a low price quotation.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept