Model:NLL-x
NLL Series Aluminium Alloy Bolt Type Strain Clamp (tension clamp, strain clamp, dead-end clamp) refers to the hardware used to fix the wire to bear the tension of the wire and hang the wire to the tension string or tower.
Model:TMB-5/8
Galvanized Steel Wire Rope Thimble is a kind of hoisting machinery spreader. It can be used on power transmission, power distribution, power station, etc.
Model:LP16SS
Stainless Steel Wire Rope Thimble is a kind of hoisting machinery spreader. It can be used on power transmission, power distribution, power station, etc.
Model:CW32L
CW Type Brass Cable Gland for use with steel wire armoured cables. Used to provide clamping of the armour wire to ensure electrical continuity and mechanical retention of the cable. The CW type brass cable gland is used for outdoor applications and where necessary to provide an IP66 seal with the outer sheath of the cable.
Model:JEC-AB001
Galvanized Pipe Clamp is a component in which one material embraces or encloses another material. Produced by high-quality steel, the surface is smooth, thick zinc layer, corrosion-resistant, long service life, safe and reliable. Products are widely used in many fields such as electric power, telecommunications, radio and television.
Model:JEC-EA001
The surface of the Carbon Steel Lead Head Spindle For Pin Type Insulator is hot-dip galvanized, and one end is threaded with a lead head.
Model:LP8B
Trolley Line Clamps are made by casting or forging. It’s widely used on power transmission, power Distribution, Power station, Trolley Line, etc.
Model:MRJ-600K400(H)
33KV 400mm Aluminium Alloy Hanging Cable Busbar Line Spacer Clamp is used to reduce aeolian vibration of wires and ground wires in overhead power lines or for grading or shielding in power lines not more than 330KV and of insulator strings at substations which may involve dampers, spacer clamps, grading and shielding ring, etc.
Model:STRD-MxL
The stay rod is also named Hot Dip Galvanized Bow Type Adjustable Stay Rod, it is a component used to connect the stay wire to the ground anchor. There are two types: bow stay rod and tubular stay rod. The bow type stay rod includes stay bow, stay rod, stay plate, and stay thimble. The tubular stay set is adjustable by means of an eye topped of the turnbuckle.
Model:FCO33100C660-C
The primary purpose of any fuse cutouts is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. 33KV Expulsion Porcelain Fuse Cut Out provides reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.
Model:OKG-63x254-a
High Voltage Limit Current Fuse can be used in system with AC 50Hz and rated voltage of 10KV, used together with other protection electric facilities such as loading switches. It can protect power transformers and other power facilities against overloading or circuit break. It is mainly used in American style transformers as backup protection.
Model:FL11(33)D-SF-A
Jec SloFast fuse links are designed to carry 150% of their rated current without damage to the fuse link itself or the cutout in which it is installed. This capacity is for special loading situations, such as short time overloads and cold load pick-up.