LV Fuse Cutouts
01
Single Pole insulated House Service 80A Cutout
Product Introduction
The JHF-60/80A, Industry-standard design, 60/80A rated fused cutout is one of our best selling products. Manufactured from our own track resistant grade of glass reinforced polyester, this fuse cutout is unobtrusive in appearance and vandal resistant, when compared to many of the more traditional materials such as porcelain.
Product Parameter (Specification)
|
No. |
Description |
Value |
|
1 |
Standards Referred |
ESI12.20, BS88 Part1: 1975, IEC 947-3 |
|
2 |
Rated Voltage (V) |
415V |
|
3 |
Rated Current (A) |
80A |
|
4 |
Size: Height (mm) Width (mm) Depth (mm) |
88 90 42 |
|
5 |
Contacts Material |
Copper, Bright Tinned Copper or Copper Alloy Silver Plated |
|
6 |
Housing Material |
Glass Reinforced Polyester |
Product Feature and Application
1) The fuse base is complete fitted with solid brass terminal blocks with serrated bores and two pinching brass screws per conductor to suit stranded aluminum and copper phase and neutral conductors of up to 35mm2 nominal cross-sectional area. The brass screws shall be size M8.
2) The fuse base incorporates looping facility (on both incoming and outgoing circuits ) to connect banks of cutouts. Separate brass serrated bores each with two pinching brass screws are provided per phase and neutral incoming, outgoing and looping connections.
3) The incoming phase terminal on the fuse base is protected with a hinged nylon shield red in colour.
4) The fuse carrier is suitable for barrel fuse link.
5) The fuse clip and its insert are fixed in position by a suitable screw arrangement.
6) Each fuse base is complete with cable entry plugs on all terminals to prevent unauthorized access.
Product Details
