surge arresters
surge arresters
"JECSANY" is a professional China various medium and high voltage product provider which supplies Surge Arresters, auto reclosers, switchgear, dropout fuses, polymer/porcelain insulators, power tools, power accessories, OPGW/ADSS optical cable, distribution transformers, etc. And be able to provide one-stop service for new and old customers, including product development, design, manufacturing, transportation, installation, and after-sales service.
A surge arrester is an electrical appliance used to protect electrical equipment from high transient overvoltage hazards and to limit the freewheeling time and often the freewheeling amplitude. It is another important device that is often used in communication cables to prevent lightning damage. Lightning arresters are sometimes also called overvoltage protectors, overvoltage limiters.
Gapless metal oxide Surge arresters are used to protect the insulation of AC power transmission and transformation equipment from lightning overvoltage and operating overvoltage damage. It is suitable for overvoltage protection of transformers, transmission lines, distribution panels, switch cabinets, power metering boxes, vacuum switches, parallel compensation capacitors, rotating electrical machines and semiconductor devices.
The gapless metal oxide surge arrester has excellent nonlinear volt-ampere characteristics, good response characteristics, no freewheeling, large current capacity, low residual voltage, strong ability to suppress overvoltage, pollution resistance, anti-aging, not subject to altitude constraints, Simple structure, no gap, tight seal, long life and so on.
The arrester is in a high resistance state under normal system operating voltage, and only microampere current flows. It exhibits low resistance under the action of overvoltage and high current, thus limiting the residual voltage across the arrester.
There are many kinds of arresters, including metal oxide arresters, line-type metal oxide arresters, gapless line-type metal oxide arresters, fully insulated composite jacket metal oxide arresters, and detachable arresters.
The main types of arresters are tubular arresters, valve arresters and zinc oxide arresters. The main working principle of each type of arrester is different, but their work is essentially the same, all to protect communication cables and communication equipment from damage.
"JECSANY" Surge Arresters have stable quality and have third-party IEC test reports, and the products are exported to North America, Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
48KV 10kA Polymer Surge Arrester
M.V. Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
- Model YH10W-48C1200
42KV 10kA Polymer Surge Arrester
M.V. Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
oxides of metals Gapless surge arresters are intended to stop potential harm from occurring in the event of common energy system surges, without affecting the system at normal operation voltage. Due to the non-linear properties of metal-oxide varistors between the voltage and current scales, gapless arresters have this unique feature. When compared to silicon carbide surge arresters, the non-linear feature is significantly greater.
- Model YH10W-42C1080
36KV 10kA Polymer Lightning Arrester
M.V. Polymer Lightning Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Oxides of metals Without gaps, the purpose of lightning arresters is to shield energy systems from potential harm during regular surges, without compromising normal operating voltage. The unique quality of gapless arresters stems from the non-linear properties of metal-oxide varistors in the voltage and current scales. The non-linear characteristic is significantly greater than that of silicon carbide lightning arresters.
- Model YH10W-36
24KV 10kA Polymer Lightning Arrester
M.V. Polymer Lightning Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Lightning arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide lightning arresters.
- Model YH10W-24
18KV 10kA Polymer Surge Arrester
In station and distribution systems, M.V. Polymer Surge Arresters are employed to guard equipment against damage from atmospheric factors (particularly lightning strikes) and operational circumstances.
Oxides of Metals When energy systems experience regular surges, surge arresters without gaps are intended to stop potential damage while having no adverse effects on the systems during normal voltage operation. The non-linear properties of metal-oxide varistors between the voltage and current scales are the source of this unique feature of gapless arresters. Comparing the non-linear feature to silicon carbide surge arresters, it is significantly higher.
- Model YH10W-18
15KV 10kA Polymer Surge Arrester
M.V. Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Oxides of metals Gap-free surge arresters are made to guard against potential damage from common energy system surges, but they don't harm the system when operating at normal voltage. The unique quality of gapless arresters stems from the non-linear properties of metal-oxide varistors in the voltage and current scales. In comparison with silicon carbide surge arresters, the non-linear feature is substantially higher.
- Model YH10W-15
12KV 10kA Polymer Surge Arrester
M.V. Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
oxides of metals Gapless surge arresters are intended to stop potential harm from occurring in the event of common energy system surges, without affecting the system at normal operation voltage. Due to the non-linear properties of metal-oxide varistors between the voltage and current scales, gapless arresters have this unique feature. When compared to silicon carbide surge arresters, the non-linear feature is significantly greater.
- Model YH10W-12
10.5KV 10kA Polymer Surge Arrester
M.V. Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
- Model YH10W-10.5
9KV 10kA Polymer Surge Arrester
Transformers and other equipment in station and distribution systems are shielded from atmospheric (particularly lightning influence) and operating circumstances by means of M.V. Polymer Surge Arresters.Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
- Model YH10W-9
3KV 5kA Polymer Metal Oxide Lightning Arrester
M.V. Polymer Lightning Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
oxides of metals Gapless lightning arresters are made to guard against potential harm during ordinary energy system surges, but they don't affect energy systems when operating at normal voltage. Due to the non-linear properties of metal-oxide varistors between the voltage and current scales, gapless arresters have this unique feature. When compared to silicon carbide lightning arresters, the non-linear feature is significantly higher.
- Model YH5W-3
36KV 10KA Porcelain Lightning Arrester
M.V. Porcelain Lightning Arresters are used in station and distribution systems to guard against atmospheric (particularly lightning influence) and operating situations that could harm transformers and other equipment.
When energy systems experience typical surges, metal oxide surge arresters without gaps are intended to stop potential damage while having no adverse effects on the systems during normal voltage operation. The unique quality of gapless arresters stems from the non-linear properties of metal-oxide varistors in the voltage and current scales. The non-linear characteristic is significantly greater than that of silicon carbide surge arresters.
- Model Y10W-36
30KV 10KA Porcelain Lightning Arrester
Transformers and other equipment in station and distribution systems are shielded from atmospheric (particularly lightning effects) and operational circumstances by M.V. Porcelain Lightning Arresters.
Surge arresters made of metal oxides with no gaps are intended to shield energy systems from potential harm during regular surges, without compromising normal operating voltage. Due to the non-linear properties of metal-oxide varistors between the voltage and current scales, gapless arresters have this unique feature. When compared to silicon carbide surge arresters, the non-linear feature is far greater.
- Model Y10W-30