Drop-out fuses should also pay attention to standard operation

Drop-out fuse is a kind of circuit protection switch. It is often used in line branches and power distribution transformers. Because of its strong protection performance and the advantages of economy and convenience when used at the same time, it has been favored by many users praise. In addition, it has the advantage of strong adaptability to the environment when it is used, that is, it can be used at any time no matter what kind of environment it is in. When installing, you must also pay attention to its standard operation

1. Avoid touches of heat. Nowadays, when many users use this kind of drop-out fuse, they often have the phenomenon of hot contact. The reason is that the fuse is not connected tightly during installation, so it will be let it gets hot

2. Firmness. No matter what you install, you must pay attention to its firmness, and this kind of drop-out fuse is no exception. It generally has to be installed on a stretcher, so the stretcher must be reliable and there is nothing that can shake Phenomenon.

3. Pay attention to the inclination angle of the melting pipe. When installing the fusion pipe, it must be noted that it has a downward inclination, generally speaking, it is 25 degrees, so that it can fall with its own weight when the melt is fused.

4. Pay attention to the correct adjustment of the length of the fusion pipe. It must be moderate. Under normal circumstances, it can be buckled for more than two-thirds after closing the switch, so as to prevent the fusion pipe from falling to the ground. , so as not to cause unexpected accidents, and also pay attention not to let it push the duckbill to death.