Model:JEC-PGC001
Galvanized Curve Bolt Plate protects the crushing of wood fibers under loading conditions.
Galvanized Curve Bolt Plate, 7" x 2.5” square x 1/4" thick
11/16" x 1 1/4” hole for 5/8" diameter bolt, Dia 14 hole for M12 bolt
Galvanized per ASTM A-153 or ASTM B695
Model:NLL-x
Tension clamp (tension clamp, strain clamp, dead-end clamp) refers to the hardware used to fix the wire to bear the tension of the wire and hang the wire to the tension string or tower.
Model:TMB-5/8
Galvanized Steel Wire Rope Thimble is a kind of hoisting machinery spreader. It can be used on power transmission, power distribution, power station, etc.
Model:LP16SS
Stainless Steel Wire Rope Thimble is a kind of hoisting machinery spreader. It can be used on power transmission, power distribution, power station, etc.
Model:CW32L
CW Type Brass Cable Gland for use with steel wire armoured cables. Used to provide clamping of the armour wire to ensure electrical continuity and mechanical retention of the cable. The CW type brass cable gland is used for outdoor applications and where necessary to provide an IP66 seal with the outer sheath of the cable.
Model:JEC-AB001
Pipe Clamp is a component in which one material embraces or encloses another material. Produced by high-quality steel, the surface is smooth, thick zinc layer, corrosion-resistant, long service life, safe and reliable. Products are widely used in many fields such as electric power, telecommunications, radio and television.
Model:JEC-EA001
The surface of the steel Spindle is hot-dip galvanized, and one end is threaded with a lead head.
Model:LP8B
Trolley Line Clamps are made by casting or forging. It’s widely used on power transmission, power Distribution, Power station, Trolley Line, etc.
Model:MRJ-600K400(H)
Protective fitting is used to reduce aeolian vibration of wires and ground wires in overhead power lines or for grading or shielding in power lines not more than 330KV and of insulator strings at substations which may involve dampers, spacer clamps, grading and shielding ring, etc.
Model:STRD-MxL
The stay rod is also named stay set, it is a component used to connect the stay wire to the ground anchor. There are two types: bow stay rod and tubular stay rod. The bow type stay rod includes stay bow, stay rod, stay plate, and stay thimble. The tubular stay set is adjustable by means of an eye topped of the turnbuckle.