China Cable Terminals and Accessories Factory
"JECSANY" is a professional China various medium and high voltage product provider which supplies Cable Terminals and Accessories, surge Arrester and Protection Device, vacuum circuit breakers, auto reclosers, switchgear, power tools, power accessories, OPGW/ADSS, distribution transformers, etc. And be able to provide one-stop service for new and old customers, including product development, design, manufacturing, transportation, installation, and after-sales service.
The copper terminal (Cable Lug) is used for crimping the terminal of copper cable, and the whole material is copper.
Copper-aluminum terminals (Bimetal terminals Lug) are used for crimping terminals for copper-aluminum cables. The material of barrel part is aluminum and the material of the stud hole part is copper.
The parallel groove clamp (PG Clamp) is used for the connection of small and medium section aluminum stranded wire or steel core aluminum stranded wire and the steel stranded wire of the overhead lightning arrester at the position that does not bear the tension, and also used for the jumper connection of non-linear towers. Power engineering materials (fittings) are mainly used for connecting wires to connect to each other in power line engineering.
Parallel groove clamps are all non-load-bearing types, mainly including bolt type parallel groove clamp, H type (or C type) parallel groove clamp and wedge type parallel groove clamp, among which bolt type parallel groove clamp is also There are two types of equal-diameter parallel groove clamps and different diameter parallel groove clamps.
The Joint Automatic Splice are used to connect wires or lightning conductors, and are mainly splicing pipes and repair pipes, parallel groove clamps, pre-twisted wires, etc., which are used in various crimping methods of wires (clamping, hydraulic, explosion pressure, etc.).
The connection methods of wires mainly include clamping and crimping. When the cross-section of the wire is less than or equal to 240mm2, the clamping connection is used. When the cross-section of the wire is greater than or equal to 300 mm2, the crimping connection is used. For example, it is connected by hydraulic pressure or explosion pressure method, and the lightning protection wire is connected by crimping method.
"JECSANY" Cable Terminals and Accessories have stable quality and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
The copper terminal (Cable Lug) is used for crimping the terminal of copper cable, and the whole material is copper.
Copper-aluminum terminals (Bimetal terminals Lug) are used for crimping terminals for copper-aluminum cables. The material of barrel part is aluminum and the material of the stud hole part is copper.
The parallel groove clamp (PG Clamp) is used for the connection of small and medium section aluminum stranded wire or steel core aluminum stranded wire and the steel stranded wire of the overhead lightning arrester at the position that does not bear the tension, and also used for the jumper connection of non-linear towers. Power engineering materials (fittings) are mainly used for connecting wires to connect to each other in power line engineering.
Parallel groove clamps are all non-load-bearing types, mainly including bolt type parallel groove clamp, H type (or C type) parallel groove clamp and wedge type parallel groove clamp, among which bolt type parallel groove clamp is also There are two types of equal-diameter parallel groove clamps and different diameter parallel groove clamps.
The Joint Automatic Splice are used to connect wires or lightning conductors, and are mainly splicing pipes and repair pipes, parallel groove clamps, pre-twisted wires, etc., which are used in various crimping methods of wires (clamping, hydraulic, explosion pressure, etc.).
The connection methods of wires mainly include clamping and crimping. When the cross-section of the wire is less than or equal to 240mm2, the clamping connection is used. When the cross-section of the wire is greater than or equal to 300 mm2, the crimping connection is used. For example, it is connected by hydraulic pressure or explosion pressure method, and the lightning protection wire is connected by crimping method.
"JECSANY" Cable Terminals and Accessories have stable quality and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
- View as
35kv Heat Shrink Termination Kit outdoor Cable Accessories
Model:35kv Heat Shrink Termination Kit outdoor Cable Accessories
Heat Shrink outdoor Termination Kit shrinkable cable termination kit raychem is widely used in the indoor and outdoor directly and intermediate terminal connection of every kinds of power cable. These Heat Shrinkable Termination Kits are easy to install and designed in compliance with the international design standards.
Heat Shrink Termination Kit 15kV outdoor cable accessories
Model:WSY-15 Heat Shrink Termination Kit 15kV outdoor cable accessories
Indoor / Outdoor shrinkable cable termination kit raychem is widely used in the indoor and outdoor directly and intermediate terminal connection of every kinds of power cable. These Heat Shrinkable Termination Kits are easy to install and designed in compliance with the international design standards.
SC Type Electric Power Terminals Connector Lug Crimp Cable Lugs
Model:SC SC Type Electric Power Terminals Connector Lug Crimp Cable Lugs
Cable terminal lug is a kind of accessory for electrical connections, which can be crimped on cable/wire/ electrical equipment without thermal treatment.
Al/Cu Bimetallic Compression Terminal Joint
Model:GTL Al/Cu Bimetallic Compression Terminal Joint
GTL Type aluminum Copper Bi- Metallic splice are used for non-tension joining Aluminum Cable to Copper Cable.
GL-413 Type Aluminum Tension AAAC ACSR 240 Mm2 Cable Connector Joints Automatic Splice
Model:GL-413
Jecsany as a professional high quality GL-413 Type Aluminum Tension AAAC ACSR 240 Mm2 Cable Connector Joints Automatic Splice manufacturer. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-410 Type Aluminum Tension AAAC ACSR 150 Mm2 Cable Connector Joints Automatic Splice
Model:GL-410
Jecsany as the professional manufacturer, we would like to provide you high quality GL-410 Type Aluminum Tension AAAC ACSR 150 Mm2 Cable Connector Joints Automatic Splice. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-409A Aluminum Tension 120mm2 AAAC ACSR Cable Connector Joints Automatic Splice
Model:GL-409A
You are welcomed to come to Jecsany factory to buy the latest selling, low price, and high-quality GL-409A Aluminum Tension 120mm2 AAAC ACSR Cable Connector Joints Automatic Splice.The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-408 Type Aluminum Tension 95mm2 AAAC ACSR Cable Connector Joints Automatic Splice
Model:GL-408
You can rest assured to buy customized GL-408 Type Aluminum Tension 95mm2 AAAC ACSR Cable Connector Joints Automatic Splice from Jecsany. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-407 Type Aluminum Tension AAAC ACSR 70 Mm2 Cable Connector Joints Automatic Splice
Model:GL-407
With years of experience in production GL-407 Type Aluminum Tension AAAC ACSR 70 Mm2 Cable Connector Joints Automatic Splice, Jecsany can supply a wide range of GL-407 Type Aluminum Tension AAAC ACSR 70 Mm2 Cable Connector Joints Automatic Splice. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-406A Type 50 Mm2 Aluminum Tension Joints Automatic Splice AAAC ACSR Cable Connector
Model:GL-406A
Jecsany is a professional leader China GL-406A Type 50 Mm2 Aluminum Tension Joints Automatic Splice AAAC ACSR Cable Connector manufacturer with high quality and reasonable price. Welcome to contact us. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-404A Type Aluminum Tension Cable Connector Joints Automatic Splice
Model:GL-404A
High quality GL-404A Type Aluminum Tension Cable Connector Joints Automatic Splice is offered by China manufacturer Jecsany. Buy GL-404A Type Aluminum Tension Cable Connector Joints Automatic Splice which is of high quality directly with low price.The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-401 Type Aluminum Tension Cable Connector Joints Automatic Splice
Model:GL-401
Jecsany is a leading China GL-401 Type Aluminum Tension Cable Connector Joints Automatic Splice manufacturer, supplier and exporter. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
Jecsany is one of the professional Cable Terminals and Accessories manufacturers and suppliers in China. Welcome to buy newest cheap Cable Terminals and Accessories from our factory. our products are high quality and latest selling, IEC, we are happy to provide you with a low price quotation.
