China Joint Automatic Splice Factory
"JECSANY" is a professional China various medium and high voltage product provider which supplies , Joint Automatic Splice, Line Protection Device, auto reclosers, switchgear, Surge arrester, Dropout fuse, Insulators, power tools, power accessories, OPGW/ADSS optical cable, distribution transformers, etc. And be able to provide one-stop service for new and old customers, including product development, design, manufacturing, transportation, installation, and after-sales service.
Quick-connect Joint Automatic Splice is suitable for maintenance and repair of wire connection and broken line. It is a device that relies on tension. During installation, the line has a tension of at least 10% of the rated strength of the wire to ensure a reliable electrical connection. The current is transmitted to the other end through the metal clip of the wire.
When connecting wires, traditional JY, JT and other connecting joint splice need special equipment, which is time-consuming and labor-intensive. Using quick connecting Joint Automatic Splice is convenient, time-saving and labor-saving. When a cable in a transmission line fails, a small section of the fault is typically burned. If the cable length is not reserved for direct burial, pipe arrangement, etc., directly connect the blown cable, which often cannot be directly connected due to insufficient length. The existing solution is to make up for the insufficient length through the connection of multiple intermediate joints, and the tension resistance is not good, and it is easy to break the second time or the wire falls off to cause an accident, and the maintenance cost is high. The tapered quick connecting Joint Automatic Splice has the characteristics of high connection strength, not easy to be pulled and broken, easy to use, strong electrical conductivity, etc., and solves the above problems.
The tapered quick-connect Joint Automatic Splice: 1) can withstand the full strength of the wire itself, the tapered shell design ensures high-strength adhesion between it and the wire, and the internal metal clip is embedded in the wire; 2) No special tools are required for installation, no pressure; 3) It is convenient for live work installation; 4) It simplifies the installation steps and greatly improves the safety of the operation; 5) It can provide the same conductivity as the wire, and the metal clip can conduct the current to a higher conductivity. On the outer shell of the wire clip, the meshing teeth of the metal clip can penetrate the residual oxide layer on the surface of the wire, the large area of contact points helps to dissipate heat, and the meshed metal clip maintains good electrical conductivity under various conditions of tension change.
"JECSANY" Joint Automatic Splice have stable quality and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
Quick-connect Joint Automatic Splice is suitable for maintenance and repair of wire connection and broken line. It is a device that relies on tension. During installation, the line has a tension of at least 10% of the rated strength of the wire to ensure a reliable electrical connection. The current is transmitted to the other end through the metal clip of the wire.
When connecting wires, traditional JY, JT and other connecting joint splice need special equipment, which is time-consuming and labor-intensive. Using quick connecting Joint Automatic Splice is convenient, time-saving and labor-saving. When a cable in a transmission line fails, a small section of the fault is typically burned. If the cable length is not reserved for direct burial, pipe arrangement, etc., directly connect the blown cable, which often cannot be directly connected due to insufficient length. The existing solution is to make up for the insufficient length through the connection of multiple intermediate joints, and the tension resistance is not good, and it is easy to break the second time or the wire falls off to cause an accident, and the maintenance cost is high. The tapered quick connecting Joint Automatic Splice has the characteristics of high connection strength, not easy to be pulled and broken, easy to use, strong electrical conductivity, etc., and solves the above problems.
The tapered quick-connect Joint Automatic Splice: 1) can withstand the full strength of the wire itself, the tapered shell design ensures high-strength adhesion between it and the wire, and the internal metal clip is embedded in the wire; 2) No special tools are required for installation, no pressure; 3) It is convenient for live work installation; 4) It simplifies the installation steps and greatly improves the safety of the operation; 5) It can provide the same conductivity as the wire, and the metal clip can conduct the current to a higher conductivity. On the outer shell of the wire clip, the meshing teeth of the metal clip can penetrate the residual oxide layer on the surface of the wire, the large area of contact points helps to dissipate heat, and the meshed metal clip maintains good electrical conductivity under various conditions of tension change.
"JECSANY" Joint Automatic Splice have stable quality and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
- View as
GL-413 Type Aluminum Tension AAAC ACSR 240 Mm2 Cable Connector Joints Automatic Splice
Model:GL-413
Jecsany as a professional high quality GL-413 Type Aluminum Tension AAAC ACSR 240 Mm2 Cable Connector Joints Automatic Splice manufacturer. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-410 Type Aluminum Tension AAAC ACSR 150 Mm2 Cable Connector Joints Automatic Splice
Model:GL-410
Jecsany as the professional manufacturer, we would like to provide you high quality GL-410 Type Aluminum Tension AAAC ACSR 150 Mm2 Cable Connector Joints Automatic Splice. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-409A Aluminum Tension 120mm2 AAAC ACSR Cable Connector Joints Automatic Splice
Model:GL-409A
You are welcomed to come to Jecsany factory to buy the latest selling, low price, and high-quality GL-409A Aluminum Tension 120mm2 AAAC ACSR Cable Connector Joints Automatic Splice.The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-408 Type Aluminum Tension 95mm2 AAAC ACSR Cable Connector Joints Automatic Splice
Model:GL-408
You can rest assured to buy customized GL-408 Type Aluminum Tension 95mm2 AAAC ACSR Cable Connector Joints Automatic Splice from Jecsany. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-407 Type Aluminum Tension AAAC ACSR 70 Mm2 Cable Connector Joints Automatic Splice
Model:GL-407
With years of experience in production GL-407 Type Aluminum Tension AAAC ACSR 70 Mm2 Cable Connector Joints Automatic Splice, Jecsany can supply a wide range of GL-407 Type Aluminum Tension AAAC ACSR 70 Mm2 Cable Connector Joints Automatic Splice. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-406A Type 50 Mm2 Aluminum Tension Joints Automatic Splice AAAC ACSR Cable Connector
Model:GL-406A
Jecsany is a professional leader China GL-406A Type 50 Mm2 Aluminum Tension Joints Automatic Splice AAAC ACSR Cable Connector manufacturer with high quality and reasonable price. Welcome to contact us. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-404A Type Aluminum Tension Cable Connector Joints Automatic Splice
Model:GL-404A
High quality GL-404A Type Aluminum Tension Cable Connector Joints Automatic Splice is offered by China manufacturer Jecsany. Buy GL-404A Type Aluminum Tension Cable Connector Joints Automatic Splice which is of high quality directly with low price.The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
GL-401 Type Aluminum Tension Cable Connector Joints Automatic Splice
Model:GL-401
Jecsany is a leading China GL-401 Type Aluminum Tension Cable Connector Joints Automatic Splice manufacturer, supplier and exporter. The Automatic Splice Rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor pass the set of serrated jaws and into the center . They are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.
Jecsany is one of the professional Joint Automatic Splice manufacturers and suppliers in China. Welcome to buy newest cheap Joint Automatic Splice from our factory. our products are high quality and latest selling, IEC, we are happy to provide you with a low price quotation.
