48 Cores Single Jacket All-Dielectric Self-Supporting (ADSS) Optical Fiber Cable
Model:ADSS-48B1-PE-100
Single jacket All-Dielectric Self-Supporting (ADSS) 48 Cores Single Jacket All-Dielectric Self-Supporting (ADSS) Optical Fiber Cable is idea for installation in distribution as well as transmission envirline installations are required as its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass.
Model:ADSS-48B1-PE-100
Send Inquiry PDF DownLoad
Product Description
ADSS cable has the characteristics of full dielectric, no metal, non-conductivity, small cable diameter, high tensile force, low linear expansion coefficient, and wide temperature adaptation.We can customize the number of cores of ADSS fiber optic cables according to customer needs. The number of cores of optical fiber ADSS cable is 2, 6, 12, 24, 36, 48, up to 288 cores, etc.
Main Feature
1．Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication;
2．Track -Resistant outer jacket available for the high voltage;
3．Line where space potentials up to 35kv;
4．Gel-Filled buffer tubes are S-Z stranded;
5．Instead of Aramid yarn or glass yarn, there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters);
6．The fiber counts from 4-48 fibers.
7．Fiber Type G.652
Product Parameter (Specification) of 48 Cores Single Jacket All-Dielectric Self-Supporting (ADSS) Optical Fiber Cable
| Description | Structural Parameters | No. | Dimension |
| Center Reinforcement | FRP | 1 | 2.7mm |
| Beam tube | Single bundle tube fiber core number | 12 Cores | 2.6mm |
| Number of beam tubes | 4 Nos | ||
| Inner sheath | PE Inner sheath | 1.0mm | |
| Enhancement layer | Aramid yarn |
|
|
| Outer sheath | Outer sheath | 1.7mm | |
| Material of Outer sheath |
|
MDPE | |
| Cable diameter |
|
13.6mm | |
| Fiber Chromatography | Blue, orange, green, brown, gray, white, red, black, yellow, purple, pink, Light blue | ||
| Beam tube chromatography | Blue, orange, green, brown | ||
| Description | Value | |
| Minimum bending radius | Lay | 20D |
| run | 15D | |
| Rated tensile strength（RTS） |
|
12.4kN |
| Ultimate operating tension (UOS) |
|
7.4kN |
| Compressive strength | long term | 1000 N/100mm |
| short term | 4000 N/100mm | |
| attenuation | 1310nm | ≤0.35dB/km |
| 1550nm | ≤0.22dB/km | |
| Operating temperature |
|
-40℃～+70℃ |
| Storage temperature |
|
-40℃～+70℃ |
| Laying temperature |
|
-30℃～+60℃ |
Note: All dimensions and data are nominal values.
Remarks:
ADSS Cable detail requirements need to be sent to us for cable design and price calculation. Below requirements are a must:
A, Power transmission line voltage level
B, fiber count
C, Span or tensile strength
D, weather conditions
Application
