China Arrester and Protection Device Factory
"JECSANY" is a professional China various medium and high voltage product provider which supplies surge Arrester and Protection Device, vacuum circuit breakers, auto reclosers, switchgear, dropout fuses, polymer/porcelain insulators, power tools, power accessories, OPGW/ADSS, distribution transformers, etc. And be able to provide one-stop service for new and old customers, including product development, design, manufacturing, transportation, installation, and after-sales service.
There are many kinds of arresters, including metal oxide arresters, line-type metal oxide arresters, gapless line-type metal oxide arresters, fully insulated composite jacketed metal oxide arresters, and detachable arresters.
The main types of arresters are tubular arresters, valve arresters and zinc oxide arresters. The main working principle of each type of arrester is different, but their work is essentially the same, all to protect communication cables and communication equipment from damage. Zinc oxide arrester is a lightning arrester with superior protection performance, light weight, pollution resistance and stable performance. It mainly uses the good nonlinear volt-ampere characteristics of zinc oxide, so that the current flowing through the arrester is extremely small (micro-amp or milli-amp level) under normal working voltage; when over-voltage acts, the resistance drops sharply, discharging the over-voltage energy for protection. The difference between this arrester and the traditional arrester is that it has no discharge gap, and uses the nonlinear characteristics of zinc oxide to play the role of leakage and interruption.
The lightning protection grounding device includes the following parts:
1) Lightning receiving devices: metal poles (air-termination devices) that directly or indirectly receive lightning, such as lightning rods, lightning protection belts (nets), overhead ground wires and lightning arresters, etc.
2) Grounding wire (down-lead): the metal conductor used to connect the lightning receiving device and the grounding device.
3) Grounding device: the sum of the grounding wire and the grounding body. Grounding body refers to resistance reducing agent, ion grounding electrode, flat steel, etc.
"JECSANY" Arrester and Protection Device have stable quality and have third-party IEC test reports, and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
There are many kinds of arresters, including metal oxide arresters, line-type metal oxide arresters, gapless line-type metal oxide arresters, fully insulated composite jacketed metal oxide arresters, and detachable arresters.
The main types of arresters are tubular arresters, valve arresters and zinc oxide arresters. The main working principle of each type of arrester is different, but their work is essentially the same, all to protect communication cables and communication equipment from damage. Zinc oxide arrester is a lightning arrester with superior protection performance, light weight, pollution resistance and stable performance. It mainly uses the good nonlinear volt-ampere characteristics of zinc oxide, so that the current flowing through the arrester is extremely small (micro-amp or milli-amp level) under normal working voltage; when over-voltage acts, the resistance drops sharply, discharging the over-voltage energy for protection. The difference between this arrester and the traditional arrester is that it has no discharge gap, and uses the nonlinear characteristics of zinc oxide to play the role of leakage and interruption.
The lightning protection grounding device includes the following parts:
1) Lightning receiving devices: metal poles (air-termination devices) that directly or indirectly receive lightning, such as lightning rods, lightning protection belts (nets), overhead ground wires and lightning arresters, etc.
2) Grounding wire (down-lead): the metal conductor used to connect the lightning receiving device and the grounding device.
3) Grounding device: the sum of the grounding wire and the grounding body. Grounding body refers to resistance reducing agent, ion grounding electrode, flat steel, etc.
"JECSANY" Arrester and Protection Device have stable quality and have third-party IEC test reports, and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
- View as
48KV 10kA Polymer Surge Arrester
Model:YH10W-48C1200
M.V. 48KV 10kA Polymer Surge Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
42KV 10kA Polymer Surge Arrester
Model:YH10W-42C1080
M.V. 42KV 10kA Polymer Surge Arrester Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
Station Type Surge Arrester 30KV 10kA
Model:YH10WZ-30C1080
The Station Type Surge Arrester 30KV 10kA zinc oxide surge arrester is the most advanced over-voltage protector in the world. Due to make the resistor disc of core component mainly adopt zinc oxide arrester. Compared with the conventional silicon carbide arrester, this prescription of the product improves greatly the volt-ampere characteristics of the resistor disc and increase through current capability at over-voltage so as to bring a rad local-changes for the characteristics of the arresters.
Station Type Surge Arrester 108KV 10kA
Model:YH10WZ-108C3850
The Station Type Surge Arrester 108KV 10kA zinc oxide surge arrester is the most advanced over-voltage protector in the world. Due to make the resistor disc of core component mainly adopt zinc oxide arrester. Compared with the conventional silicon carbide arrester, this prescription of the product improves greatly the volt-ampere characteristics of the resistor disc and increase through current capability at over-voltage so as to bring a rad local-changes for the characteristics of the arresters.
36KV 10kA Polymer Lightning Arrester
Model:YH10W-36
M.V. 36KV 10kA Polymer Lightning Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Lightning arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide lightning arresters.
24KV 10kA Polymer Lightning Arrester
Model:YH10W-24
M.V. 24KV 10kA Polymer Lightning Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Lightning arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide lightning arresters.
18KV 10kA Polymer Surge Arrester
Model:YH10W-18
M.V. 18KV 10kA Polymer Surge Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
12KV 10kA Polymer Surge Arrester
Model:YH10W-12
M.V. 12KV 10kA Polymer Surge Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
10.5KV 10kA Polymer Surge Arrester
Model:YH10W-10.5
M.V. 10.5KV 10kA Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
9KV 10kA Polymer Surge Arrester
Model:YH10W-9
M.V. 9KV 10kA Polymer Surge Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
15KV 10kA Polymer Surge Arrester
Model:YH10W-15
M.V. 15KV 10kA Polymer Surge Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
3KV 5kA Polymer Metal Oxide Lightning Arrester
Model:YH5W-3
M.V. 3KV 5kA Polymer Metal Oxide Lightning Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Lightning arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Lightning arresters.
Jecsany is one of the professional Arrester and Protection Device manufacturers and suppliers in China. Welcome to buy newest cheap Arrester and Protection Device from our factory. our products are high quality and latest selling, IEC, we are happy to provide you with a low price quotation.
