Products
- View as
Station Type Surge Arrester 36KV 10kA
Model:YH10WZ-36C1030
Zinc oxide arrester is the current international advanced overvoltage protector. Because its core component adopts zinc oxide resistance sheet; compared with the traditional silicon carbide arrester, the volt-ampere characteristics of the arrester are improved, and the overvoltage current capacity is improved, thus bringing about fundamental changes in the characteristics of the arrester.
When the arrester is under normal operating voltage, the current flowing through the arrester is only microampere. When subjected to overvoltage, due to the nonlinearity of the zinc oxide resistor, the current flowing through the arrester instantly reaches thousands of amperes. The arrester is in the conducting state, release overvoltage energy, thus effe......
48KV 10kA Polymer Lightning Arrester
Model:YH10W-48C1500
M.V. 48KV 10kA Polymer Lightning Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Lightning arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide lightning arresters.
48KV 10kA Polymer Surge Arrester
Model:YH10W-48C1200
M.V. 48KV 10kA Polymer Surge Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
42KV 10kA Polymer Surge Arrester
Model:YH10W-42C1080
M.V. 42KV 10kA Polymer Surge Arrester Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
Station Type Surge Arrester 30KV 10kA
Model:YH10WZ-30C1080
The Station Type Surge Arrester 30KV 10kA zinc oxide surge arrester is the most advanced over-voltage protector in the world. Due to make the resistor disc of core component mainly adopt zinc oxide arrester. Compared with the conventional silicon carbide arrester, this prescription of the product improves greatly the volt-ampere characteristics of the resistor disc and increase through current capability at over-voltage so as to bring a rad local-changes for the characteristics of the arresters.
Station Type Surge Arrester 108KV 10kA
Model:YH10WZ-108C3850
The Station Type Surge Arrester 108KV 10kA zinc oxide surge arrester is the most advanced over-voltage protector in the world. Due to make the resistor disc of core component mainly adopt zinc oxide arrester. Compared with the conventional silicon carbide arrester, this prescription of the product improves greatly the volt-ampere characteristics of the resistor disc and increase through current capability at over-voltage so as to bring a rad local-changes for the characteristics of the arresters.
36KV 10kA Polymer Lightning Arrester
Model:YH10W-36
M.V. 36KV 10kA Polymer Lightning Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Lightning arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide lightning arresters.
24KV 10kA Polymer Lightning Arrester
Model:YH10W-24
M.V. 24KV 10kA Polymer Lightning Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Lightning arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide lightning arresters.
18KV 10kA Polymer Surge Arrester
Model:YH10W-18
M.V. 18KV 10kA Polymer Surge Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
12KV 10kA Polymer Surge Arrester
Model:YH10W-12
M.V. 12KV 10kA Polymer Surge Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
10.5KV 10kA Polymer Surge Arrester
Model:YH10W-10.5
M.V. 10.5KV 10kA Polymer Surge Arresters are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
9KV 10kA Polymer Surge Arrester
Model:YH10W-9
M.V. 9KV 10kA Polymer Surge Arrester are used to protect transformers and other equipments in station and distribution systems against the damage by atmospheric (especially lightning effects) and operational conditions.
Metal oxides Surge arresters without gaps are designed to prevent probable damages in the case of typical surges in energy systems while it has no negative effect on energy systems in normal operation voltage. This special feature of gapless arresters originating from non-linear characteristics of metal-oxide varistors between voltage and current scales. The non-linear feature is much higher compared to silicon carbide Surge arresters.
