China Cable Terminals and Accessories Factory
"JECSANY" is a professional China various medium and high voltage product provider which supplies Cable Terminals and Accessories, surge Arrester and Protection Device, vacuum circuit breakers, auto reclosers, switchgear, power tools, power accessories, OPGW/ADSS, distribution transformers, etc. And be able to provide one-stop service for new and old customers, including product development, design, manufacturing, transportation, installation, and after-sales service.
The copper terminal (Cable Lug) is used for crimping the terminal of copper cable, and the whole material is copper.
Copper-aluminum terminals (Bimetal terminals Lug) are used for crimping terminals for copper-aluminum cables. The material of barrel part is aluminum and the material of the stud hole part is copper.
The parallel groove clamp (PG Clamp) is used for the connection of small and medium section aluminum stranded wire or steel core aluminum stranded wire and the steel stranded wire of the overhead lightning arrester at the position that does not bear the tension, and also used for the jumper connection of non-linear towers. Power engineering materials (fittings) are mainly used for connecting wires to connect to each other in power line engineering.
Parallel groove clamps are all non-load-bearing types, mainly including bolt type parallel groove clamp, H type (or C type) parallel groove clamp and wedge type parallel groove clamp, among which bolt type parallel groove clamp is also There are two types of equal-diameter parallel groove clamps and different diameter parallel groove clamps.
The Joint Automatic Splice are used to connect wires or lightning conductors, and are mainly splicing pipes and repair pipes, parallel groove clamps, pre-twisted wires, etc., which are used in various crimping methods of wires (clamping, hydraulic, explosion pressure, etc.).
The connection methods of wires mainly include clamping and crimping. When the cross-section of the wire is less than or equal to 240mm2, the clamping connection is used. When the cross-section of the wire is greater than or equal to 300 mm2, the crimping connection is used. For example, it is connected by hydraulic pressure or explosion pressure method, and the lightning protection wire is connected by crimping method.
"JECSANY" Cable Terminals and Accessories have stable quality and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
The copper terminal (Cable Lug) is used for crimping the terminal of copper cable, and the whole material is copper.
Copper-aluminum terminals (Bimetal terminals Lug) are used for crimping terminals for copper-aluminum cables. The material of barrel part is aluminum and the material of the stud hole part is copper.
The parallel groove clamp (PG Clamp) is used for the connection of small and medium section aluminum stranded wire or steel core aluminum stranded wire and the steel stranded wire of the overhead lightning arrester at the position that does not bear the tension, and also used for the jumper connection of non-linear towers. Power engineering materials (fittings) are mainly used for connecting wires to connect to each other in power line engineering.
Parallel groove clamps are all non-load-bearing types, mainly including bolt type parallel groove clamp, H type (or C type) parallel groove clamp and wedge type parallel groove clamp, among which bolt type parallel groove clamp is also There are two types of equal-diameter parallel groove clamps and different diameter parallel groove clamps.
The Joint Automatic Splice are used to connect wires or lightning conductors, and are mainly splicing pipes and repair pipes, parallel groove clamps, pre-twisted wires, etc., which are used in various crimping methods of wires (clamping, hydraulic, explosion pressure, etc.).
The connection methods of wires mainly include clamping and crimping. When the cross-section of the wire is less than or equal to 240mm2, the clamping connection is used. When the cross-section of the wire is greater than or equal to 300 mm2, the crimping connection is used. For example, it is connected by hydraulic pressure or explosion pressure method, and the lightning protection wire is connected by crimping method.
"JECSANY" Cable Terminals and Accessories have stable quality and the products are exported to Southeast Asia, South Africa, South America, the Middle East and other global markets. OEM customization can also be made according to the drawings or samples provided by customers.
- View as
CAPG-C4 Adjustable Copper Aluminium Bolts Type Bimetallic Parallel Groove PG Clamp
Model:CAPG-C4
Jecsany is China manufacturer & supplier who mainly produces CAPG-C4 Adjustable Copper Aluminium Bolts Type Bimetallic Parallel Groove PG Clamp with many years of experience. Hope to build business relationship with you.The Parallel Groove clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilize belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment, also we can change to stainless bolts and nuts with was......
CAPG-C3 Adjustable Copper Aluminium Bolts Type Bimetallic Parallel Groove PG Clamp
Model:CAPG-C3
Jecsany is a professional China CAPG-C3 Adjustable Copper Aluminium Bolts Type Bimetallic Parallel Groove PG Clamp manufacturer and supplier.The Parallel Groove clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilize belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment, also we can change to stainless bolts and nuts with washers.
APG-C2 High Voltage Adjustable Copper Aluminium Cable PG Bimetallic Clamp
Model:CAPG-C2
Find a huge selection of APG-C2 High Voltage Adjustable Copper Aluminium Cable PG Bimetallic Clamp from China at Jecsany. The Parallel Groove clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilize belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment, also we can change to stainless bolts and nuts with washers.
CAPG-C1 Good Electrical Contact Aluminium Parallel Groove Connector PG Bimetallic Clamp
Model:CAPG-C1
Jecsany is CAPG-C1 Good Electrical Contact Aluminium Parallel Groove Connector PG Bimetallic Clamp manufacturers and suppliers in China who can wholesale CAPG-C1 Good Electrical Contact Aluminium Parallel Groove Connector PG Bimetallic Clamp.The Parallel Groove clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilize belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment, also we can change to stainless b......
CAPG-B3 Adjustable Bimetallic Copper Aluminium Bolt Type Bimetallic Parallel Groove PG Clamp
Model:CAPG-B3
Jecsany CAPG-B3 Adjustable Bimetallic Copper Aluminium Bolt Type Bimetallic Parallel Groove PG Clamp have characteristic design & practical performance & competitive price.The Parallel Groove clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilize belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment, also we can change to stainless bolts and nuts with washers.
CAPG-B2 Aluminum Hot Forged Bimetallic Sheet Bimetal Cable PG Clamp
Model:CAPG-B2
Jecsany the following is an introduction to CAPG-B2 Aluminum Hot Forged Bimetallic Sheet Bimetal Cable PG Clamp, I hope to help you better understand CAPG-B2 Aluminum Hot Forged Bimetallic Sheet Bimetal Cable PG Clamp. The Parallel Groove clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilize belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment, also we can change to stainless bolts and nuts with wash......
CAPG-B1 Bimetallic Copper Aluminium Parallel Groove / PG Clamp for Transmission Line
Model:CAPG-B1
Welcome to buy CAPG-B1 Bimetallic Copper Aluminium Parallel Groove / PG Clamp for Transmission Line from Jecsany. The Parallel Groove clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilize belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment, also we can change to stainless bolts and nuts with washers.
CAPG-A2 Bolt Type Bimetallic Aluminum And Copper Parallel Groove Clamp
Model:CAPG-A2
Jecsany as the professional manufacturer, we would like to provide you CAPG-A2 Bolt Type Bimetallic Aluminum And Copper Parallel Groove Clamp.The Parallel Groove clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilize belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment, also we can change to stainless bolts and nuts with washers.
CAPG-A1 Adjustable Copper Aluminium Bolt Type Bimetallic Parallel Groove PG Clamp
Model:CAPG-A1
You can rest assured to buy CAPG-A1 Adjustable Copper Aluminium Bolt Type Bimetallic Parallel Groove PG Clamp from Jecsany factory and we will offer you the best after-sale service and timely delivery. The Parallel Groove clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilize belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment, also we can change to stainless bolts and nuts with washers.
APG-C4 Adjustable Bolt Type Aluminum Parallel Groove PG Clamp
Model:APG-C4
Jecsany as a professional APG-C4 Adjustable Bolt Type Aluminum Parallel Groove PG Clamp manufacturer, you can rest assured to buy APG-C4 Adjustable Bolt Type Aluminum Parallel Groove PG Clamp from our factory and we will offer you the best after-sale service and timely delivery. Parallel Groove CLAMP is used for connecting or branching AAC,AAAC or ACSR overhead conductors. Forging creates a high strength clamp.Slotted holes allow adjustment for varying conductors on each side.Its type test is in accordance with IEC6238-1.
APG-C3 Adjustable Bolt Type Aluminum Parallel Groove PG Clamp
Model:APG-C3
Jecsany is one of the famous China APG-C3 Adjustable Bolt Type Aluminum Parallel Groove PG Clamp manufacturers and suppliers.
Parallel Groove CLAMP is used for connecting or branching AAC,AAAC or ACSR overhead conductors. Forging creates a high strength clamp.Slotted holes allow adjustment for varying conductors on each side.Its type test is in accordance with IEC6238-1.
APG-C2 Adjustable Bolt Type Aluminum Cable Parallel Groove PG Clamp
Model:APG-C2
Jecsany as one of the professional China APG-C2 Adjustable Bolt Type Aluminum Cable Parallel Groove PG Clamp manufacturers and factory, we are strong strength and complete management.Parallel Groove CLAMP is used for connecting or branching AAC,AAAC or ACSR overhead conductors. Forging creates a high strength clamp.Slotted holes allow adjustment for varying conductors on each side.Its type test is in accordance with IEC6238-1.
Jecsany is one of the professional Cable Terminals and Accessories manufacturers and suppliers in China. Welcome to buy newest cheap Cable Terminals and Accessories from our factory. our products are high quality and latest selling, IEC, we are happy to provide you with a low price quotation.
